Controlling The Projector From A Computer; Setting Up The Projector; Network Settings - Sony VPL-VW100 Mode D'emploi

Controlling the
Projector from a
Computer
Click "Control." You can perform various
adjustments and settings of the projector on
a computer display.
The functions of the buttons in the windows
are the same as those on the remote control
supplied with the projector.
Settings of the projector are lit.
After you have changed the settings on the
projector, click "Refresh" at the upper right-
hand corner of the window to update the
status. The lighting buttons are changed.
Controlling the Projector from a Computer / Setting up the Projector
Setting up the
Projector
Click "Setup." The Password Properties
dialog box appears. The name of the "User"
account is preset without a password to
"root" at the factory. You can set the owner
information, etc. Click "Apply" at the lower
part of each window to update the projector
to the data input in each window.
Owner and projector information
Click "OWNER INFORMATION."
Owner
Enter owner information.
Projector
Enter the location of the projector.
Memo
Enter a memo, if required.

Network settings

Click "NETWORK."
Internet Protocol (TCP/IP)
Normally, set "Obtain an IP address
automatically (DHCP)." If you select
"Specify an IP address," set the necessary
items.
57
GB