Step 4: Selecting The Menu Language - Sony VPL-VW100 Mode D'emploi

Step 4: Selecting the Menu Language

You can select one of fifteen languages for displaying the menu and other on-
screen displays. The factory default setting is English.
Tip
You can operate the menu using the M/m/</, (arrow)/ENTER buttons on the side
panel of the projector instead of the M/m/</,/ENTER buttons on the remote control.
1
Plug the AC power cord into a wall outlet.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the
The ON/STANDBY indicator flashes in green, and then lights in green.
3
Press MENU.
The menu appears.
LIGHT INPUT
DYNAMIC STANDARD
PICTURE MODE
USER 1 USER 2
ENTER
LENS ADJ PIC
WIDE MODE RCP
REAL COLOR PROCESSING
BRIGHT
/ (on/standby) switch to turn on the projector.
? 1
MENU
Picture
Signal
Function
Installation
Setup
Information
2
CINEMA
USER 3
4,5,6
3 3
MENU
RESET
CONTRAST
Picture Mode : Cinema
Adjust Picture
O f f
RCP :
Normal
Color Space :
Sel : Set : Back :
Step 4: Selecting the Menu Language
Exit :
27
GB