Technical Data - Weelko WKM0013 Mode D'emploi

CONTENT
Please check that there are no missing
parts when you receive the parcel:
-Nail gel removal machine
OPERATION
1- First of all you should add the nail
polish remover into the plastic tank pla-
ced inside the device.
2- Afterthat you can switch on the
device and a red light will be turned on
(letter H), as shown in the picture:
3- You should wait around two mi-
nutes until the green light is turned on
(letter S) as shown in the second picture
and a whistling that indicates you can
put your hand into the equipment.
EN
4- Once this light is turned on, the
patient can introduce its hand during at
least 5 minutes. To ensure an optimum
result of removal, the patient's hands
can be up to 10 minutes inside the de-
vice. Please take into account that the
maximum temperature arises 52º.
5- After 10 minutes, the W light
turns on so you can now take off the
patient hand and with the help of a
scraper remove the gel remaining on
the nail. You can proceed then with the
polish.

TECHNICAL DATA

DIMENSIONS
RATED POWER
MAX. TEMPERATURE
13/16,5 * 11,5
36 W
52º
© 2020 Weelko
www.weelko.com
Importer: Weelko Barcelona, S.L.
ESB65397556