Important Safety Instructions
Read carefully and keep for future reference
WARNING!
Important safety instructions
1. The door seals and seal areas should
be cleaned with a damp cloth. The
appliance should be inspected for
damage to the door seals and door seal
areas and if these areas are damaged
the appliance should not be operated
until it has been repaired by a service
technician trained by the manufacturer.
Use of Your Oven
1.
After plugging in the oven you will be
prompted to select a language and to
set the time. These settings can be
changed at any time, see page 17.
2.
Do not use the oven for any reason
other than the preparation of food and
beverages. This oven is specifically
designed to heat or cook food. Do not
use this oven to heat chemicals or
other non-food products.
3.
Before use, check that utensils/
containers are suitable for use in
microwave ovens.
4.
When the oven is not being used, do
not store any objects inside the oven
in case it is accidentally turned on.
5.
The appliance must not be operated
by MICROWAVE or COMBINATION
WITHOUT FOOD IN THE OVEN.
Operation in this manner may damage
the appliance.
8
EN
2. Do not operate this appliance if it
has a damaged cord or plug, if it is
not working properly, or if it has been
damaged or dropped. It is dangerous for
anyone other than a service technician
trained by the manufacturer to perform
repair service.
Heater operation
Before using CONVECTION, STEAM,
GRILL or COMBINATION function for the
first time, wipe excessive oil off in the oven
cavity and operate the oven without food
and accessories on GRILL 1 for 15 minutes.
This will allow the oil that is used for rust
protection to be burned off.
CAUTION! Hot surfaces
After cooking the oven
accessories will be very hot.
Fan motor operation
After using the oven, the fan motor may
rotate for a few minutes to cool the electric
components. This is normal and you can
remove food even though the fan motor
operates. You can continue using the oven
during this time.