Customising A Timer Programme - OERTLI OETRONIC 4 Notice D'installation, D'utilisation Et D'entretien

3. Operating instructions
+
MODE
%
0 2 4 6 8 10 12 14 16 18
$
MODE
C002393-C
1 2 3 4
1 2 3 4
%
0 2 4 6 8 10 12
$
MODE
C002436-A
9
2"
A000858-A
20 22 24
5 6 7
5 6 7
14 16 18 20 22 24
3x
To go back to the previous display, press the key r.
3.2.2.

Customising a timer programme

Only the timer programmes P2, P3, P4 and the domestic hot water
programme P r can be modified.
1. Press the MODE and r keys simultaneously for 2 seconds.
2. The time is displayed. To select the timer programme to be
modified, turn the rotary button. To confirm, press the rotary
button.
To go back to the previous display, press the key r.
3. All of the days flash. The new programme will be active every day
of the week.
To modify the programme for a particular day, press the rotary
button several times until the desired day flashes.
4. Turn the rotary button to the left and position the cursor on 0:00.
5. The symbol b is steady, the selection mode for the comfort time
ranges is active.
To select a comfort time range, turn the rotary button to the right.
The zone selected is displayed under b on the graphic bar.
6. Press the Cm key. The symbol v is steady, the selection mode for
the reduced time ranges is active.
To select a reduced time range, turn the rotary button to the
right. The zone selected is displayed under v on the graphic bar.
7. To return to the selection mode for the comfort time ranges, press
Cx.
8. To return to the principal display, press the MODE key or wait 20
seconds.
RS400 - Package AD257
23/04/2009 - 300020550-001-A