Section 3. Installation Instructions; Materials And Tools; Installation Requirements - Zodiac Nature2 Vision Pro Manuel D'installation Et De Fonctionnement

section 3. Installation
Instructions
WARNING
FoR YouR sAFEtY: This product must be installed
and serviced by a professional pool/spa service
technician, as described on the front cover of this
manual. The procedures in this manual must be
followed exactly. Failure to follow warning notices
and instructions may result in property damage,
serious injury, or death. Improper installation and/or
operation will void the warranty.
WARNING
EQuIpMENt uNdER pREssuRE: Always turn
pump off prior to installing or servicing the Nature
Vision Pro. Your pump/filter system is operated under
pressure and the pressure must be released before
you begin work. Please see your pump/filter owner's
manual for further instructions.

3.1 Materials and tools

Materials Furnished for Installation
Nature Vision Pro Aboveground Vessel with Universal
2
Unions
Flex Hose Adapter Kit
Installation and Operation Manual
tools Needed for Installation
Screw Driver or Nut Driver for hose clamps
Knife to cut flex hose or short flex hose section
|
Zodiac Nature 2 Vision Pro
® ® TM
2
Installation and Operation Manual

3.2 Installation Requirements

Decide where to install the Nature
• The vessel must be installed on the existing pad or a
concrete slab to support the weight.
• The vessel must be installed as the last piece of
equipment in the circulation plumbing system just
before the pool with the Nature
and the chlorine side as the outlet.
• The vessel must be installed downstream from the
heater or heater damage may occur.
• If the vessel is installed below the pool water level
and there are no ball valves to shut off the water
flow from the pool, then it must be installed with
a check valve. The check valve will isolate the
vessel and prevent pool draining during installation,
cartridge change, or chlorine tablet addition.
A check valve can interfere with the proper operation
of certain Suction Vacuum Release System (SVRS)
products. To avoid possible entrapment hazard,
serious injury, or death, make sure to review the
operation/owners manual of your particular SVRS
product before installing the check valve.
ENGLISH Page 7
Vision Pro vessel.
2
2
side as the inlet
WARNING