Nature Vision Pro Flexible Hose Installation; Hard Pipe Installation - Zodiac Nature2 Vision Pro Manuel D'installation Et De Fonctionnement

Page 8
ENGLISH
3.3 Nature Vision pro Flexible hose
2
Installation
1. Make sure the pool pump is turned off.
2. Locate a suitable section of flex hose to install
the vessel, approximately 43 cm (17
conforms to the installation requirements outlined
in Section 3.2.
3. For flex hose plumbing installation, cut out a 42
cm (16⅝") section of the flex hose to insert the
vessel (see Figure 3).
Flow
Outlet
To Pool
Nature
2
Figure 3. Flexible hose Installation
Zodiac Nature
®
long, that
")
A
Vision Pro
Filter
|
2 Vision Pro Installation and Operation Manual
® TM
4. Connect the flex hose outlet from the filter to the
vessel inlet port. Secure the flex hose with the
clamp provided in the hose adapter kit.
5. Connect the flex hose vessel outlet port to the pool
return line. Secure the flex type with the clamp
provided in the hose adapter kit.
6. Start the pump and check for leaks.
Nut, Universal union
Adapter
Clamp
O-Ring
Inlet
Total length of the Nature
Plug
vessel with the full unions is 42 cm (16⅝").
Pump
Flex Hose
Flow
A
Vision Pro
2
From Pool