Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.4
FINISHING YOUR INSTALLATION
FINAL PREPARATION
All exterior steel body parts should be cleaned with warm, soapy water and with
a liquid stainless steel cleaner.
If any staining or grease build-up occurs, do not use abrasive cleaners, powder
cleaners, steel wool or other abrasive cloths. When removing hard stains from the
stainless steel unit, we recommend that you soak the area with hot, wet cloths
to loosen the substance on the unit. After the stain has been suffi ciently soaked,
use a normal wood or nylon scraper to remove the stain. Never use a metal knife,
spatula, or any other metal tool to scrape stains off of the stainless steel unit.
Scratches are impossible to remove.
Before using the oven for the fi rst time, wash the oven cavity thoroughly with
a warm soap and water solution to remove any impurities left over from the
installation process, then wipe dry.
14
Publicité
Chapitres
Table des Matières
