General Warning; 1- General Description And Depuro Pro/Depuro Pro Evo Main Function; 2- Depuro Pro/Depuro Pro Evo Application - Vortice DEPURO PRO Série Notice D'emploi Et D'entretien

DEPURO PRO/DEPURO PRO EVO
Please read this instruction manual carefully before using the product.
The general safety warnings and regulations described in this manual must be carefully followed during the use,
operation, and maintenance of the DEPURO PRO/DEPURO PRO EVO product. Not following the guidance can lead to a
decrease in efficiency and protection to users and installers. Vortice industrial ventilation (Vortice) excepts no responsibility or
liability for damages or injuries due to not following the guidance of the safety regulations and instructions described in the following.
-ALL RIGHTS RESERVED The information contained in this instruction manual cannot be used for different proposals than those
for which it has been made. This publication and fan supplied documentation may not be reproduced in whole or in part without
previous written permission. The content, illustrations and diagrams of this document are a general reference and may change slightly
without notice.

General Warning

 This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
 Children shall not play with the appliance.
 Cleaning and user maintenance shall not be made by children without supervision.
 These appliances are designed for use in residential and commercial properties.
 The appliance must be installed by a professionally qualified electrician.
 The electrical system to which the product is connected must be in compliance with
applicable regulations.
 All maintenance, checking and repair of the equipment must be carried out by trained
personnel. The required safety must always be taken to avoid any risk to the user.
 An omnipolar switch with a contact opening distance of 3 mm or higher should be provided
for installation, enabling complete disconnection under overvoltage category III conditions.
 Any kind of modification shall be considered as product tampering and shall nullify the
relative warranty.
 Products equipped with single-phase wiring (M) engines ALWAYS require connection to
220-240V (or only 230V where required) single-phase lines.
 Any kind of modificationshall be considered as product tampering and shall nullify the
relative warranty.
41