7- Equipment Maintenance; Filter Shelf Life; Filter Technical Data; Setup Of Filter Replacing - Vortice DEPURO PRO Série Notice D'emploi Et D'entretien

7. EQUIPMENT MAINTENANCE
DEPURO PRO/DEPURO PRO EVO maintenance for correct operation essentially consists of replacing the filters,
which are vital for the efficiency of the unit.
All maintenance, checking and repair of the equipment must be carried out by trained personnel.
The required must always be taken to avoid any risk to the user.
7.1.

FILTER SHELF LIFE

The average service life of the filters that equip DEPURO PRO/DEPURO PRO EVO in clean environments (such as
offices, hospitals, etc.) and in dirty environments (such as warehouses, industrial buildings, etc.) is described below:
Pre-filter ISO COARSE 65% (G4) between 4 and 6 months
Absolute high efficiency filter HEPA H14 between 10 and 12 months
-Dirty environments (warehouses, industrial etc.)
Pre-filter ISO COARSE 65% (G4) between 2 and 4 months
Absolute high efficiency filter HEPA H14 between 8 and 10 months
IMPORTANT: The shelf life of the absolute high efficiency filter HEPA H14 will be greatly reduced if the pre-
filter ISO COARSE 65% (G4) is not used or maintained.

7.2. FILTER TECHNICAL DATA

FILTRO HEPA
FILTRO HEPA
FILTRO ISO COARSE 65% (G4)
FILTRO ISO COARSE 65% (G4)

7.3. SETUP OF FILTER REPLACING

DEPURO PRO/ DEPURO PRO EVO warns users when it is time to change the equipment filters (both the pre-filter
and the H14 absolute filter). This warning is displayed on the control panel. These parameters are preset from
manufacture and should not be set up before using the unit, although they can be configurated (See more details in the
reg control manual).
7.4. FILTERS AND DEPURO PRODUCT WASTE
IMPORTANT: Exhausted filters should not be disposed of in normal disposal containers. Must be
deposited in the special containers for special waste, always using maximum protection and safety
measures.
EFFICIENCY DIMENSIONS
(mm)
H14 305x305x66
H14 305x610x66
ISO COARSE 65% 287x287x24
ISO COARSE 65% 287x592x24
AIRFLOW/PRESSURE
MEDIUM
at 0,45 m/s
AREA DROP
(m 3 /h/Pa) *
(m 2 )
2 151/175
4,1 301/175
0,2 700/70
0,3 1500/70
WEIGHT
(Kg)
1,9
3,2
0,2
0,2
56