Ts 100 Mk Ii Beltpack Transmitter - Beyerdynamic Opus 100 Mk II Notice D'utilisation

3.

TS 100 Mk II Beltpack Transmitter

3.1 Controls and Indicators
8
Audio input socket, 4-pin connection for microphones (lavalier, headsets). There are 5
1
different connections.
ON/OFF switch (ON = switch to "ON"-position; OFF = switch to "OFF"-position). Switch
2
off the transmitter when not in use.
Battery status LED to indicate the power on / off and battery status.
3
(a) When the beltpack transmitter is switched on this LED will flash for a moment to
indicate the normal battery status.
(b) When the LED stays red after having switched on the transmitter the battery is too
weak and must be replaced.
Casing
4
Gain control to adjust input gain
5
GT/MT switch: When you use electric guitars this switch must be in the "GT"-position. In
6
the GT mode the gain control is deactivated. Switch to the "MT"-position when you use
condenser and wired microphones. In the MT mode the gain control is activated.
Battery compartment and cover
7
1
2
3
4
5
6
7
31