How To Adjust The Squelch - Beyerdynamic Opus 100 Mk II Notice D'utilisation

• Thread the power cable through the cable grip as shown on the illustration below. The
cable grip prevents the connector from being pulled off by accident.
1.5 Setting up
• Switch on the receiver
• As soon as you switch on the transmitter, the RF indicator
speak into the microphone, the AF indicator
of the sound level. If the LED does not illuminate or there is no sound, the system should
be checked.
• The microphone output level has to be adjusted at the amplifier or mixer.
1.6

How to adjust the Squelch

• If the RF indicator
The more LEDs illuminated, the stronger the interference.
• In this case the inteference can be suppressed with the squelch control
clock-wise to the right.
• Please note, adjusting the squelch can affect the sensitivity of the receiver and the
distance between transmitter and receiver antenna may need to be reduced.
26
. The red LED will illuminate.
1
2 illuminates before the transmitter is switched on, noise will occur.
will illuminate. When you
2
will illuminate according to the strength
3
by rotating it
10