Digital Tg 1000 Uhf Beltpack Transmitter - Beyerdynamic TG 1000 Guide De Démarrage Rapide

Quick Start Guide TG 1000 – Beltpack Transmitter
4.

Digital TG 1000 UHF Beltpack Transmitter

Oberseite
Unterseite
4-pin mini XLR connector (male with
TG pin assignment) to connect
microphones or instruments
AF peak LED
On-off button
Power on LED
Antenna connector, SMA socket
How to Insert Batteries
• Take hold of the cover of the battery compartment
side.
• Flap the cover of the battery compartment
• Insert two alkaline batteries, AA 1.5 V or rechargeable NiMH batteries according to the symbols in
the battery compartment
• Flap the cover of the battery compartment
• The current battery status is shown in the display of the transmitter
that before the synchronisation the appropriate battery type has been selected in the channel menu.
How to Operate the Transmitter
• Connect a microphone or the WA-CGI intrument cable to the 4-pin mini XLR connector
• Connect the supplied antenna with SMA connector to the antenna connector
• Turn on the beltpack transmitter by holding the on-off button
is shown in the display
• The display shows the battery status and the name, which has been entered in the first line of
the receiver.
• On the second line, depending on the setting, you will see the channel and frequency group or the
frequency. By pressing the on-off button
on the second line.
Further information are: RF power, battery, microphone head and status of encryption and power
lock.
• When you hold the on-off button
version number.
• Make sure that transmitter and receiver operate on the same frequency.
• To turn off the transmitter hold the on-off button
downwards.
.
upwards to close. Magnets ensure a secure fastening.
. The Power on LED
briefly several times you can display further information
pressed while turning on, you can display the region code and
Charging contacts
OLED display
Gain switch 0 dB / -12 dB
Cover of battery compartment
Battery compartment
Infrared interface
Belt clip
on top at the inlets at the right and left hand
pressed, until the standard display
will illuminate green.
pressed until the message "Off" is displayed.
13
and receiver. Make sure
.
.