Steba VG 200 Mode D'emploi page 24

Masquer les pouces Voir aussi pour VG 200:
Table des Matières

Publicité

∙ Never immerse the appliance in water.
∙ Do not operate the appliance if it is damaged (for example if it
felt down).
∙ The manufacturer is not liable for damage occurred by using
the apliance in another way than described or if a mistake in
operating has been made
∙ The apliance becomes very hot. Do not move the apliance until
it has cooled down!
∙ To prevent injury, repairs such as replacing a damaged cord,
should only be carried out by customer service.
Attention! Housing and glass get hot. Danger of
burns! Do not place the appliance on a sensitive sur-
face (e.g. painted furniture) and keep a distance of at
least 70cm to burnable materials. The backside of the appliance
must be positioned direct at the kitchen wall.
Cleaning and maintainance:
∙ The device should be cleaned after each use
∙ Unplug the device
∙ The device should cool down a little. It can be cleaned easier
when it is not that hot.
∙ Never immerse the device in water!
∙ Use a humid cloth with a little bit of detergent to clean it. Re-
sisting dirt should be covered with some oil, wait for ca 5 min
and try to remove it again with a humid cloth. Do not use abhe-
rasive cleaners. When cleaning the oil tray, be careful, that the
liquid in it is cooled down completely.
Working place:
Important:
Never place this device on or next to hot surfaces (e.g. hot stoves). Only use it on a
even, stable and a heat resisting surface. It is important that no inflamable items are
near to the device.
Safety requirements during usage:
∙ Only use the appliance at a safety plug socket. This should be
connected to a earth leakage circuit breaker
24

Publicité

Table des Matières
loading

Table des Matières