Protective Clothing - Güde GPS 40A Mode D'emploi

basis of its output voltage in idling conditions.
When working in small or hot rooms, insulating bases
and interim layers, as well as gauntlets made from
leather or other non-conductive materials, are to be
used to insulate the body against the fl oor, walls,
conductive parts of the device and similar.

Protective clothing

Caution! Risk of accident due to spraying
sparks
The spraying cutting sparks may lead to painful
burn injuries.
Therefore, always observe the following instruc-
tions:
• Always wear a leather apron.
• Use leather gloves.
• Wear suitable head protection when cutting
overhead.
• Ensure that your trouser legs cover the tops of
your shoes.
• Wear sturdy, insulating footwear.
Whilst working, the welder's entire body must be
protected against radiation and burns by means of
the clothing and face protection.
Gauntlets made from a suitable material (leather)
must be worn on both hands. These must not be
damaged.
Special welding gloves to be worn at all times.
Suitable aprons must be worn to protect the clothing
against fl ying sparks and burns. If the nature of the
work, e.g. overhead welding, requires this, a protec-
tive suit must worn and, where necessary, this must
also include suitable head protection.
The protective clothing which is used, as well as all
the accessories, must be compliant with the "Per-
sonal Protective Equipment" Directive (2016/425).
SYMBOLS
WARNING/CAUTION!
Ground before use
WARNING - Read the operating instruc-
tions to reduce the risk of injury.
Use a welding mask!
370V
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Class H
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Artikelnummer: 20063
Baujahr: 2017
Seriennummer:
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Special welding gloves to be worn at all
times.
Wear safety cut through resistant shoes
with safety sole and steel toe !
Protective apron to be used
Unplug the machine before any work
on it.
Wear dust mask
Warning against toxic fumes!
Warning against hot surfaces!
Warning against dangerous voltage
The appliance must be stored in a dry place and
protected from frost.
Keep the machine out of reach of children.
GPS 40A
Never expose tool to rain.
Single Phase Output
Static Frequency Converter
GPS 40A
Rectifi er
10A/84V
10A/84V
Plasma arc cutting
370V
Suitable for welding with an increased 370V
GPS 40A
electric risk.
10A/84V 40A/26V
Single-phase alternating current with
Class H
rated frequency of 50-60 Hz
Class H
40A 25.8A 20A
Artikelnummer: 20063
Baujahr: 2017
Artikelnummer: 20063
Seriennummer:
96V 90.3V 88V
10A/84V 40A/26V
Baujahr: 2017
Direct Current
Seriennummer:
30A 15A
40A 25.8A
370V
96V 90.3V
Fan
30A
Class H
Artikelnummer: 20063
Baujahr: 2017
Seriennummer:
ENGLISH
GPS 40A
40A/26V
40A/26V
40A 25.8A 20A
40A 25.8A 20A
96V 90.3V 88V
96V 90.3V 88V
30A 15A
30A 15A
20A
88V
15A
25