BWT water+more bestmin M Instructions De Montage Et D'emploi page 12

Installing the bestmin filter cartridge
Remove the filter cartridge from the packaging and check for damage.
f
Remove the hygiene cap from the filter cartridge.
f
f Note the installation date and replacement date on the label of the filter cartridge. (see section 4)
Screw the filter cartridge into the filter head from left to right.
f
12
Replacing a worn bestmin filter cartridge
Warning: The bestmin filter cartridge should be replaced within 12 months of it first being used
1
2
7.2 Fitting the bestflush or bestflush PLUS (Option)
Read through the operating instructions for the bestflush/
f
bestflush PLUS.
f Fit the bestflush/bestflush PLUS directly at the filter head or
attach to the wall bracket (separate hose available as an op-
tional extra, see drawing); observe the direction of flow
Fit the water outlet hose at the outlet of the bestflush/best-
f
flush PLUS
f Check installation for leaks
Fit the display of the bestflush PLUS in the field of vision
f
Programme the bestflush PLUS as described in the operating
f
instructions and start it up
f Screw out of the filter head from right to left.
While doing this, fold the filter head forwards,
f
depending on the installed position.
f Dispose of the used bestmin filter cartridge
with the household rubbish.
Remove the filter cartridge from the packag-
f
ing and check for damage.
2
f Remove the hygiene cap from the filter car-
tridge.
Note the installation date and replacement
f
1
date on the label of the filter cartridge. (see
section 4)
Screw the filter cartridge into the filter head
f
from left to right.