Playing Back Image Files; Playing In The Desired Order (Playlist); Adding Tracks/Files; Playing The Playlist - Pioneer UDP-LX500 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Playing back image files

❖ About Slideshow
A display of the files in the folder switches
automatically.
Note
• Some BD-R/-RE discs have playback
protection. To cancel the protection, input the
password set for the disc.
• It may take a few seconds before playback
starts. This is normal.
• It may not be possible to play some files
properly.
• The number of views may be restricted.
• Depending on the connected devices and
conditions, some time may be required for
playback to start and for the image to switch.
Playing in the desired
order (Playlist)
The discs that can add tracks and files to the
Playlist are as shown below.
• DVDs/CDs/USB devices on which audio files
are recorded

Adding tracks/files

Use this procedure to add tracks and files, and
create the Playlist.
1
Press SOURCE to display the Source function.
The Source function can also be displayed by
selecting Source from Home Menu, then pressing
ENTER.
2
Select Disc or USB.
Load the disc beforehand.
to select, then press ENTER.
Use
/
3
Select the track/file to be added.
Use
to select.
4
Press POP UP MENU to display the POP UP
MENU menu.
5
Select Add to Playlist to add to Playlist.
to select, then press ENTER.
Use
/
The track or file selected in step 3 is added to the
Playlist.
• To add more tracks or files, repeat steps 3 to 5.

Playing the Playlist

1
Press SOURCE to display the Source function.
The Source function can also be displayed by
selecting Source from Home Menu, then pressing
ENTER.
2
Select Playlist.
to select, then press ENTER.
Use
/
3
Select the track/file to be played.
to select, then press ENTER.
Use
/
Playback starts from the selected track/file and
continues until the end of the list is reached. Use
u/i to play the previous or next track/file. The
Now Playing screen is displayed.
Deleting tracks/files from
the Playlist
1
Use
to select the track/file to be deleted, then
press POP UP MENU to display the POP UP MENU
menu.
2
Use
/
to select Remove from Playlist, then
press ENTER.
Note
• In the following cases, all information in the
playlist will be deleted.
– When you open the disc tray.
– When you turn off the power.
05
37
En

Publicité

Table des Matières
loading

Table des Matières