Displaying The Disc Information; Enjoying Bonusview Or Bd-Live - Pioneer UDP-LX500 Mode D'emploi

Displaying the disc
information
 Press DISPLAY.
• The disc information appears on the TV screen.
To switch off the information display, press
DISPLAY again.
• The information display differs between during
playback and when playback is stopped.
• During audio CD playback, the track elapsed
playing time appears on the TV screen. Each
DISPLAY, it changes shown
time you press
as below.
Track remaining time  Disc elapsed time 
Disc remaining time  No information  Track
elapsed time
• Pressing and holding
seconds or more will display the detailed
information of the disc on the TV screen.
Pressing it again will close the display.
• The page can be switched by pressing
while the detailed information of the disc is
being displayed.
Enjoying BONUSVIEW or
BD-LIVE
This player is compatible with BD-Video
BONUSVIEW and BD-LIVE.
When using BD-Video discs compatible with
BONUSVIEW, you can enjoy such functions as
secondary video (picture in picture) (page 33) and
secondary audio (page 33). With BD-Video discs
supporting BD-LIVE, special video images and
other data can be downloaded from the Internet.
Data recorded on BD video and downloaded from
BD-LIVE is stored on the USB flash drive (external
memory). To enjoy these functions, connect a USB
flash drive (minimum 1 GB capacity, 2 GB or
greater recommended) supporting USB 2.0 High
Speed (480 Mbit/s) to the USB port.
• When you insert or remove a USB flash drive,
be sure to turn the player's power off.
• To recall data stored in the USB flash drive, first
insert the disc media that was being used at the
time the data was downloaded (if a different
disc is loaded, the data stored on the USB flash
drive cannot be played).
• If a USB flash drive containing other data
(previously recorded) is used, the video and
audio may not play back properly.
• Do not disconnect the USB flash drive while
playback is in progress.
• Some time may be required for the data to load
(read/write).
DISPLAY for two
/
Caution
• It may not be possible to use the BONUSVIEW
and BD-LIVE functions if there is insufficient
space on the USB flash drive. In this case, refer
to Erasing data that has been added to BDs
and application data on page 46 for erasing
the Virtual Package data and the BD-LIVE data
in the USB flash drive.
Note
• Operation of USB flash drives is not
guaranteed.
• Playback of BD-LIVE function data differs
depending on the disc used. For details, consult
the user instructions supplied with the disc.
• To enjoy the BD-LIVE function, a network
connection and settings are required (pages 23
and 45).
• BD-LIVE is a function that provides for
connection to the Internet. Discs supporting
the BD-LIVE function may send ID codes
identifying this player and the disc to the
contents provider via the Internet.
04
31
En