Operating instructions for Mapress pressing collar and adapter for pressing collar
Final pressing with adapter for pressing collar ZB 222 / 322 (ø 108 mm)
CAUTION
Risk of injury caused by the pressing collar falling when
released
Hold pressing collar when releasing
1
Press the pressfitting; see operating instructions for the pressing
tool
2
Open the adapter for pressing collar and remove it from the
pressing collar
3
Make sure that the locking pin is in position 3
Result:
The final pressing completes the pressing sequence.
4
Pull the release lever towards the pressing collar: The locking pin is
released and is located in position 1. The pressing collar is loosened
40