Geberit Mapress 2 Mode D'emploi page 38

Operating instructions for Mapress pressing collar and adapter for pressing collar
2
Guide the claws of the adapter for pressing collar into the grooves
of the pressing collar (2) and hook them into the pins. Make sure
that the claws completely embrace the pins (3)
1
3 Release both jaw levers
Preliminary pressing with adapter for pressing collar ZB 221 / 321
(ø 108 mm)
1
Press the pressfitting; see operating instructions for pressing tool
2
Open the adapter for pressing collar and remove it from the pressing
collar
3
Make sure that the locking pin is in position 2
Result:
Preliminary pressing is complete.
The pressing collar can no longer be removed.
The process of establishing the connection is not completed until the
final pressing has been carried out with adapter for pressing collar
ZB 222 / 322.
38
2
3