Installing The Software - Canon imageFORMULA DR-C130 Guide De Configuration

DR-C130_SG.fm Page 5 Friday, March 16, 2012 8:54 AM

Installing the Software

CAUTION
• Do not connect the scanner to the computer before installing the software.
• If you connect the scanner and turn it ON before you install the software, the following
wizard screen will appear. If this wizard is displayed, click the [Cancel] button to exit the
wizard, and turn the scanner OFF.
• Log on to Windows as an Administrator.
• Close all other applications before installing the software.
Insert the Setup Disc into the disk
1
drive of the computer.
Click [Install].
3
For Windows 7/Vista
If the screen shown below is displayed,
enter the password for the user logged in
with administrative rights and click [OK].
Follow the instructions on the screen
4
to complete installation.
5
Click [Typical Installation].
2
Click [Exit] to finish installing.
5