Moving The Scanner - Canon imageFORMULA DR-C130 Guide De Configuration

DR-C130_SG.fm Page 9 Friday, March 16, 2012 8:54 AM

Moving the Scanner

• When moving the scanner, always hold it with both hands to
avoid dropping it. The scanner weighs approximately 1.8 kg (3.97
lb).
• Make sure to disconnect the interface cable and AC adapter
before moving the scanner. If the scanner is transported with
these items connected, the plugs and connectors may be
damaged.
Handling
Warning
Note the following precautions whenever using the scanner. Failure
to do so may result in a fire or electric shock.
• Never use alcohol, benzene, paint thinner, aerosol sprays, or any
other highly flammable substance near the scanner.
• Do not cut, damage, or modify the power cord. Do not place
heavy objects on the power cord, and do not pull or excessively
bend the power cord.
• Never connect the power cord when your hands are wet.
• Do not connect the scanner to a multi plug power strip.
• Do not knot or coil the power cord as this may result in a fire or
electric shock. When connecting the power cord, make sure that
the power plug is securely and completely inserted into the power
outlet.
• Do not use a power cord or AC adapter other than the ones
provided with this scanner.
• Do not take the scanner apart or modify it.
• Never try to take the AC adapter apart or modify it in any way, as
this is dangerous.
• Do not use flammable spray near the scanner.
• When cleaning the scanner, turn the power OFF and disconnect
the power cord from the power supply.
• Clean the scanner using a slightly dampened cloth which has
been well wrung out. Never use alcohol, benzene, paint thinner,
or any other flammable substances.
• If the scanner makes strange noises, or gives off smoke, heat, or
strange odors, or the scanner does not function or other
abnormalities occur when you use the machine, immediately turn
the power OFF, and disconnect the power plug from the power
outlet. Then, contact your local authorized Canon dealer or
service representative for further information.
• Do not drop the scanner, or subject it to impact or strong shock.
Should the scanner ever become damaged, immediately turn the
power OFF, and disconnect the power plug from the power
outlet. Then, contact your local authorized Canon dealer or
service representative to have the unit serviced.
• Before moving the scanner, be sure to turn the power OFF, and
disconnect the power plug from the power outlet.
9