Yamaha PDM-4210E Manuel Utilisateur page 48

OPERATING INSTRUCTIONS
The functions of the buttons located on the bottom
of the monitor change as shown below:
M M
PROGRAM UP/DOWN button
(
VOLUME UP/DOWN
buttons
( ADJUST buttons)
SUB-POWER button
• ( ) indicates the function while the MENU is displayed on the screen.
Input Switching
• Input can be switched by pressing the AV1, AV2, AV3,
AV4, RGB1 or RGB2 buttons of the remote control. And
the way to return to a TV channel is as follows:
• Pressing INPUT SELECT button at RGB2 input screen.
• Pressing some PROGRAM SELECT buttons and select a TV
channel.
• Pressing PROGRAM UP/DOWN buttons at the screen without
OSD(On-screen display).
Input can be switched in the sequence of TV ➔ AV1 ➔
•
AV2 ➔ AV3 ➔ AV4 ➔ RGB1 ➔ RGB2 by pressing the
INPUT SELECT button of the monitor or the remote
control.
TV AV1
RGB2 RGB1
MENU button
INPUT SELECT button
(OK button)
SELECT button)
AV2 AV3
AV4
POWER ON/OFF
button
INPUT SELECT
button
PROGRAM UP/DOWN
buttons
-
RGB/VIDEO
buttons
Size Switching
Each time the ZOOM button of the remote control is
pressed, the screen display size will change and the
status will be displayed at the bottom of the screen.
• During TV mode
Auto Full
14:9Zoom C14:9L
• [Auto] is a mode which uses WSS (Wide Screen Signals), which
identify the picture format movies and programs are broadcast
in.
Various broadcast stations now transmit WSS. It can be detected
and the monitor will automatically switch to the correct format.
However, some broadcasters do not transmit WSS, and in these
cases monitor will not recognize which format is being
transmitted. Therefore, the Default Zoom setting in the Function
Menu is used to choose when a WSS has not been sent or has
not been detected.
D / N
i + I / II
A / B 2-4-12
MENU
P+
+
OK
P-
VOLUME
D V D
UP/DOWN buttons
FREEZE
MUTE button
ZOOM
ZOOM button
1 2 3
PROGRAM SELECT
4 5 6
buttons
7 8 9
0
AV1 AV2 AV3 AV4
RGB1 RGB2
Zoom
47