Input Switching; Volume Adjustment; Audio Mute - Yamaha PDM-4210E Manuel Utilisateur

OPERATING INSTRUCTIONS (continued)
M
VOLUME UP/DOWN
buttons
MUTE button
RGB buttons

Input Switching

• Input can be switched by pressing the RGB1, RGB2,
buttons of the remote control.
Input can be switched in the sequence of RGB1 ➔
•
RGB2 by pressing the INPUT SELECT button of the
monitor.
RGB1
14
INPUT SELECT button
VOL
VOLUME
RGB 1 RGB 2 MUTE VOL UP/DOWN buttons
AV1 AV2 AV3 AV4
AUTO PinP SIZE RECALL
MENU
OK
ID ID SET
RGB2

Volume Adjustment

The volume can be adjusted by pressing the VOL+ and
VOL- buttons of the remote control (or the L and M
volume buttons of the monitor unit).
Adjustment status guide display
• When a button is pressed, the volume adjustment
status guide will be displayed.
• The volume will increase when the VOL+ (or L ) button is
pressed while the guide is being displayed.
• The volume will decrease when the VOL- (or M ) button is
pressed while the guide is being displayed.

Audio Mute

The audio volume can be temporarily muted by pressing
the MUTE button of the remote control.
Adjustment status guide display
(The display colour will change to magenta.)
• When a button is pressed, the volume adjustment
status guide (magenta) will be displayed.
• The volume setting can be lowered by pressing the VOL- button
while the audio is mute.
• The muting can be cancelled by pressing the VOL+ button or
MUTE button while the audio is mute.
When the MUTE button of the remote control is pressed
again, the audio will be restored and the volume display
(green) will appear.
Volume setting value
Volume 15
Volume setting value
Volume 15