Function Descriptions - Whirlpool AMD 081/1 Mode D'emploi

FUNCTION DESCRIPTIONS

6th Sense mode
The air conditioner automatically selects Cooling
or Dry mode,depending on room temperature and
sets the target temperature.
Operation mode and temperature are determined
by indoor temperature.
Cooling only models
Indoor Operation
temperature mode
26°C or below DRY
Over 26°C COOLING
NOTE: Temperature, airflow and direction are
controlled automatically in 6th Sense mode.
However, a decrease or rise of up to 2°C can be
set with the remote control if you still feel
uncomfortable.
1. Press 6th Sense button.
2. In Fan Only mode, press Fan to select High, Mid
or Low.
Rapid Cool
Used for fast cooling. The air conditioner
automatically sets the fan speed to High and the
temperature to 18ºC.
NOTE: 6th Sense mode button does not operate
when Rapid Cool function is selected.
1. Press Rapid Cool. The air conditioner
automatically sets the fan speed to High and the
temperature to 18°C.
2. To exit Rapid Cool mode, press any button
except Timer On/Off and Swing button.
Fan Speed
1. Choose desired fan speed.
• Auto-automatically controls fan speed depending
on current room temperature and temperature
control setting.
NOTE: Auto fan speed cannot be selected in Fan
Only mode.
Target
temperature
Room
temperature
• High - for maximum cooling
decrease 1.5°C
after operating
for 3 minutes
• Mid - for normal cooling
26°C
• Low - for minimum cooling
Temperature
• Press the plus button to raise the temperature.
Press the plus button once to increase the set
temperature by 1ºC, or press twice to increase
the set temperature by 2ºC.
• Press the minus button to lower the
temperature. Press the minus button to
decrease the set temperature by 1ºC, or press
twice to decrease the set temperature by 2ºC.
NOTES:
• In the Cooling mode, the temperature can be
set between 18ºC and 32ºC.
• In Fan Only mode, the temperature cannot be
set.
23