General Safety Instructions For Handling Power Tools - Meister MDS260-1 Traduction Du Manuel D'utilisation Original

5456610-Dreiecksch_man 27.04.18 09:12 Seite 35
accessories that are not intended
specifically for this electrical tool.
Just because you can affix an
accessory to your electrical tool, there is
no guarantee it is safe to use.
The permitted revolutions of the tool
insert must be at least as high as the
highest value specified on the electrical
tool. Accessories that turn faster than is
permitted may break and fly away.
The external diameter and thickness
of the tool insert must match the
dimensions of your electrical tool.
Incorrectly measured tool inserts cannot
be properly protected or checked.
There is a risk of injury. The user of the
device is liable for all property and
personal damages occurring as the
result of incorrect use.
If other components or non-original
components are used with the machine,
the manufacturer guarantee is voided.
Remaining risks:
The operating instructions for this
electrical tool contain comprehensive tips
for the safe handling of electrical tools.
However, every electrical tool has a certain
level of remaining risks which cannot be
excluded by the protective mechanisms
on the device. Always operate electrical
tools with the necessary care.
Remaining risks may be, for example:
• Touching rotating parts or tools.
• Injury caused by flying tools or tool
parts.
• Risk of fire with insufficient ventilation
of the motor.
• Adverse effects on the hearing
caused by working without ear
defenders.
The ability to work safely is dependant
on the familiarity of the operator when it
comes to handling the given electrical
tool. Appropriate knowledge of the
machinery and careful behaviour when
working help to minimise the remaining
risks.
5 – General safety
instructions for handling
power tools
WARNING! Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated
(cordless) power tool.
1 Work area
a Keep work area clean and well lit.
Cluttered and dark areas invite
accidents.
b Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
35