Cleaning The Spray Arms; External Cleaning; Internal Cleaning - Progress PVS1550 Notice D'utilisation

2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5. Make sure that there are no residues of
food or soil in or around the edge of the
sump.
6. Put back in place the flat filter (A). Make
sure that it is correctly positioned under
the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter (A).
Turn it clockwise until it locks.
CAUTION! An incorrect position
of the filters can cause bad
washing results and damage to
the appliance.

Cleaning the spray arms

Do not remove the spray arms. If the holes
in the spray arms are clogged, remove
remaining parts of soil with a thin pointed
object.

External cleaning

• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive
cleaning pads or solvents.

Internal cleaning

• Carefully clean the appliance, including
the rubber gasket of the door, with a soft
moist cloth.
Progress 15