Media; Logo Placement - Napoleon Fiberglow Série Manuel D'installation Et D'opération

3.4

media

A. Place lava or ember rock around the base of the appliance, making sure not to block any burner ports or
valve access. Retain a small amount of lava rock for step 3 and, if applicable, step 4.
B. Place formed charcoal lumps around the front and sides of the appliance.
C. Use remaining lava or ember rock to blend with the charcoal lumps.
D. GL30 ONLY: Sprinkle remaining lava rock onto the outer fi bre ember beds to hide the seam.
IMPORTANT: DO NOT COVER FRONT SLOTS BENEATH THE ANDIRONS WITH MEDIA.
GL 18
3.5

logo placement

Remove the backing of the logo supplied. Centre the
logo on the front of the appliance, ½" in from the left
side, as shown.
GL 24
½"
fi nishing
GL 30
½"
W415-1071 / F / 11.16.19
EN
11