Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
RM7
R E VE R S I N G TH E O PE N I N G S I D E O F TH E D O O R
If necessary, the opening side of the door door can be reversed, from right to left, or vice versa.
Reverse the opening side of the entire door unit as follows:
•
Remove the bottom flange 1 by unscrewing the four retaining screws, two on each side.
•
Remove hinges 2 and 3 fixed to the cabinet of the device by unscrewing the fixing screws.
Remove the "L" bracket 4 in position C by unscrewing the fixing screws.
•
•
Remove the hinges 5 and 6 fixed to the door of the device by unscrewing the fixing screws.
•
Remove the caps 7.
•
Install the door hinge that was previously in position A in position C.
•
Install the door hinge that was previously in position B in position D.
•
Insert the caps 7 and fit the "L" bracket 4 in position B.
•
Install the hinges previously fixed to the cabinet on the opposite side (position C and D).
•
Fix the bottom flange 1 to the cabinet of the device.
C
D
RM7_(DC)_IM_20190723
B
4
A
3
7
1
26
2
7
6
5
Publicité
Table des Matières
