Operation; Safety Instructions For Operators; Inspections And Maintenance; Safety Instructions For Inspections And Maintenance - Güde WP 12 T Mode D'emploi

6

Operation

•
By inserting the pin into the frame set the working height needed.
•
Close the valve of lifting cylinder
•
Pump up with the lever of the lifting cylinder
•
By opening the valve, lifting cylinder is coming back to the original position.
6.1

Safety instructions for operators

•
Use the machine after you have read the manual carefully
•
Follow all safety instructions stated in the manual
•
Act responsibly towards other persons
7

Inspections and maintenance

Keep the machine clean and dust free.
Grease all moving parts.
7.1

Safety instructions for inspections and maintenance

Only regularly maintained and cared machine can be satisfactory helper. Insufficient maintenance and care
can lead into unpredictable faults and accidents.
7.2

Inspection and maintenance plan

Time interval Description
After each use
•
8

Spare parts

Do you have any technical questions? Claim? Do you need spare parts or instructions for operation?
We are ready to help you quickly and without unnecessary bureaucracy at our site www.guede.com in the part Service.
Please help us in helping you. In order to identify your machine in case of a claim we need its serial number, product number
GB
and year of production. All the data mentioned can be found at the type plate. Please write them down bellow to have them
always handy:
Serial number:
Phone.: +49 (0) 79 04 / 700-360
Wipe up the machine with clean and dry cloth or blow it by a compressed low
pressure air.
Product number:
Fax: +49 (0) 79 04 / 700-51999
14
Other
possible
details
Year of production:
E-Mail: support@ts.guede.com