Leica Microsystems FS C Manuel D'utilisation page 12

5. Unpacking the Macroscope
• Carefully remove all components from the
transportation and packaging materials.
!
Caution!
If at all possible, avoid touching the lens sur-
faces of the objectives. If fingerprints do ap-
pear on the glass surfaces, remove them with
a soft leather or linen cloth. Even small traces
of finger perspiration can damage the surfac-
es of optical surfaces in a short time. For addi-
tional instructions, see the chapter entitled
"Care of the Comparison Macroscope"
→ page 48.
• Check the delivery carefully against the pack-
ing list, delivery note or the invoice. We highly
recommend keeping a copy of these docu-
ments with the manual in order to have deliv-
ery date and delivery package information
available when (for example) placing repeat
orders or making service calls. Please make
sure that no small parts are lost in the pack-
aging materials.
12
Note:
Keep the packaging materials for storage pur-
poses and transportation of the individual com-
ponents.
Caution:
Do not yet connect the comparison macro-
scope and peripherals to the power supply
at this point!