Festool LR 32 Mode D'emploi page 9

the dowel holes of the fi rst track of holes
onto the guide rail for use with the second
track of holes (L1, Lz).
– Drill the dowel holes of the second track of
holes.
For longer hole series, 2 guide rails can
be joined with one longitudinal stop and
FSV connecting elements (see Fig. 5).
5 Bores for hardware
If bores for hardware (hinges, fastenings,
locking bolts ...) have to be placed between
two dowel holes, the longitudinal stop must
be turned around after the dowel holes have
been drilled.
The alignment of the guide rail is carried
out again using the lateral and longitudinal
stop.
6 REACH for Festool products, their ac-
cessories and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream
users" and product manufacturers, we are
aware of our duty to provide our customers
with information. We have set up the follow-
ing website to keep you updated with all the
latest news and provide you with informa-
tion on all the materials used in our existing
products: www.festool.com/reach
9