14. Lens care
• Clean the lens surfaces with a blower brush. To remove
dirt and smudges, use a soft, clean cotton cloth or lens
tissue moistened with ethanol (alcohol) or lens cleaner.
En
Wipe in a circular motion from center to outer edge, taking
care not to leave traces or touch other parts of the lens.
• Never use thinner or benzene to clean the lens as
this might damage it, result in a fire, or cause health
problems.
• To protect the front lens element, an NC filter is available.
A lens hood also helps protect the front of the lens.
• When storing the lens in its lens case, attach both front
and rear caps.
• When the lens will not be used for a long time, store it
in a cool, dry place to prevent mold. Also store the lens
away from direct sunlight or chemicals such as camphor
or naphthalene.
• Do not get water on the lens or drop it in water as this
will cause it to rust and malfunction.
• Reinforced plastic is used for certain parts of the lens. To
avoid damage, never leave the lens in an excessively hot
place.
15. Standard accessories
• 62mm snap-on front lens cap LC-62 • Rear lens cap
• Bayonet hood HB-42
16. Optional accessories
• 62mm screw-in filters
17. Incompatible accessories
• Teleconverters
• Auto Ring BR-4 and all models of Auto Extension Ring
PK, K Ring and Bellows focusing attachment.
Other accessories may not be suitable for use with this
lens. For details, carefully read your accessories user's
manual.
24
• Flexible lens pouch CL-1018