10. Setting the aperture
Set the aperture on the camera body. When exposure
(or shooting) mode is set at "A" (Aperture Priority auto)
or "M" (manual), the camera will control to maintain the
En
predetermined f-number (up to approx. 1.6 stops) as the
effective f-number varies with shooting distance.
11. Using bayonet hood HB-42
Attaching the hood
Align the lens hood
attachment index (
the hood (either one of the
two indexes) with the lens
hood mounting index on
the lens, and turn the lens
hood clockwise until it click
stops to secure.
• Make sure that the lens
hood mounting index
aligns with the lens hood
setting index (
• If the lens hood is not correctly attached, vignetting can
occur.
• To facilitate attachment or removal of the hood, hold
it by its base (around the lens hood attachment index)
rather than its outer edge.
• To store the lens hood, attach it in the reverse position.
Detaching the hood
While holding the base of the hood (near the lens hood
attachment index) rather than its outer edge, turn it
counterclockwise to detach.
12. Flash pictures using cameras with a built-in flash
To prevent vignetting, do not use a lens hood.
22
) on
).
Lens hood attachment index
Lens hood setting index
Lens hood
mounting index