emerio CCN-110174 Mode D'emploi page 6

CCM-110174
HOW TO USE
1. Place the housing of the cotton candy maker on a firm surface at a distance from wet environments and
flammable objects.
2. Put the big bowl on the housing by rotating it anticlockwise. Make sure it fits firmly and not movable.
3. Attach the transparent ring over the edge of the big bowl. Press the white ring to bond them tightly.
Note: Do not use the cotton candy maker if the transparent part is loose.
4. Place the extractor head into the heating position.
5. Connect the cotton candy maker to the socket.
6. Turn the switch to "I" position and allow to run for at least 5 minutes, this will allow it to warm up then
switch to "O" position.
7. Pour one spoon of sugar with the provided measuring spoon into the center receptacle of the extractor
head. Switch to "I" position.
NOTE: Never use ingredients other than pure granulated sugar, this will cause clogging. Do not overfill the
sugar receptacle.
- 5 -
EN