Zanussi ZEI6840FBA Notice D'utilisation page 19

Masquer les pouces Voir aussi pour ZEI6840FBA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cookware made of cast iron, aluminium or with
a damaged bottom can cause scratches on the
glass / glass ceramic. Always lift these objects
up when you have to move them on the cooking
surface.
This appliance is for cooking purposes only. It
must not be used for other purposes, for
example room heating.
CARE AND CLEANING
Clean the appliance regularly to prevent the
deterioration of the surface material.
Deactivate the appliance and let it cool down
before you clean it.
Disconnect the appliance from the electrical
supply before maintenance.
Do not use water spray and steam to clean the
appliance.
Clean the appliance with a moist soft cloth. Only
use neutral detergents. Do not use any abrasive
INSTALLATION
WARNING! Refer to Safety chapters.
BEFORE THE INSTALLATION
Before you install the hob, write down the
information bellow from the rating plate. The rating
plate is on the bottom of the hob.
Serial number ...........................
BUILT-IN HOBS
Only use the built-in hobs after you assemble the
hob into correct built-in units and work surfaces
that align to the standards.
products, abrasive cleaning pads, solvents or
metal objects.
SERVICE
To repair the appliance contact an Authorised
Service Centre.
Use original spare parts only.
DISPOSAL
WARNING! Risk of injury or
suffocation.
Contact your municipal authority for information
on how to discard the appliance correctly.
Disconnect the appliance from the mains
supply.
Cut off the mains electrical cable close to the
appliance and dispose of it.
CONNECTION CABLE
The hob is supplied with a connection cable.
To replace the damaged mains cable, use the
cable type: H05V2V2-F which withstands a
temperature of 90°C or higher. Speak to your
local Service Centre.
19

Publicité

Table des Matières
loading

Table des Matières