Tuneup Specifications; Quick Reference Information; Wiring Diagrams - Honda iGX270 Manuel De L'utilisateur

SPECIFICATIONS (LOW PROFILE TYPES)
iGX270 (PTO shaft type S)
Length×Width×Height
Dry mass [weight]
Engine type
Displacement
[Bore×Stroke]
Net power
(in accordance with SAE J1349*)
Max. Net torque
(in accordance with SAE J1349*)
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
iGX390 (PTO shaft type S)
Length×Width×Height
Dry mass [weight]
Engine type
Displacement
[Bore×Stroke]
Net power
(in accordance with SAE J1349*)
Max. Net torque
(in accordance with SAE J1349*)
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
*
The power rating of the engine indicated in this document is the net
power output tested on a production engine for the engine model
and measured in accordance with SAE J1349 at 3,600 min
-1
Power) and at 2,500 min
engines may vary from this value.
Actual power output for the engine installed in the final machine will
vary depending on numerous factors, including the operating speed
of the engine in application, environmental conditions, maintenance,
and other variables.
384×468×303 mm
(15.1×18.4×11.9 in)
26.2 kg (57.8 lbs)
4-stroke, overhead valve,
single cylinder
3
270 cm (16.5 cu-in)
[77.0×58.0 mm (3.03×2.28 in)]
6.3 kW (8.6 PS, 8.4 bhp)
-1
at 3,600 min (rpm)
19.1 N·m (1.98 kgf·m, 14.1 lbf·ft)
-1
at 2,500 min (rpm)
1.1 L (1.2 US qt, 1.0 lmp qt)
Forced air
CDI type magneto ignition
Counterclockwise
395×484×313 mm
(15.6×19.1×12.3 in)
31.4 kg (69.2 lbs)
4-stroke, overhead valve,
single cylinder
3
389 cm (23.7 cu-in)
[88.0×64.0 mm (3.46×2.52 in)]
8.7 kW (11.8 PS, 11.7 bhp)
-1
at 3,600 min (rpm)
26.5 N·m (2.7 kgf·m, 19.5 lbf·ft)
-1
at 2,500 min (rpm)
1.1 L (1.2 US qt, 1.0 lmp qt)
Forced air
CDI type magneto ignition
Counterclockwise
(rpm) (Max. Net Torque). Mass production
TUNEUP SPECIFICATIONS (iGX270/iGX390)
ITEM
Spark plug gap
Valve clearance
(cold)
Other
specifications
QUICK REFERENCE INFORMATION (iGX270/iGX390)
Fuel
Engine oil
Spark plug
Maintenance

WIRING DIAGRAMS

-1
(rpm) (Net
(1) RECTIFIER
(2) INDICATOR
(3) FUSE
(4) ENGINE SWITCH
(5) CONTROL BOX
(6) STARTER MOTOR
(7) BATTERY
ENGLISH
SPECIFICATION
0.7–0.8 mm
(0.028–0.031 in)
IN: 0.15±0.02 mm
EX: 0.20±0.02 mm
No other adjustments needed.
Unleaded gasoline (Refer to page 8)
U.S. Pump octane rating 86 or higher
Except Research octane rating 91 or higher
U.S.
Pump octane rating 86 or higher
SAE 10W-30, API SJ or later, for general use.
Refer to page 9.
BPR6ES (NGK)
W20EPR-U (DENSO)
Before each use:
• Check engine oil level. Refer to page 9.
• Check air filter. Refer to page 10.
First 20 hours:
Change engine oil. Refer to page 9.
Subsequent:
Refer to the maintenance schedule on page 7.
(8) OIL LEVEL SWITCH
(9) IGNITION COIL
(10) SPARK PLUG
(11) CHARGING COIL
(12) POWER COIL
(13) ECM
(14) To INTERFACE
MAINTENANCE
Refer to page: 12
See your dealer.
19