Sediment Cup - Honda iGX270 Manuel De L'utilisateur

SEDIMENT CUP

Cleaning
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling fuel.
• Stop the engine and let it cool before handling fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Keep away from your vehicle.
• Wipe up spills immediately.
(LOW PROFILE TYPES)
1. Unsnap the air cleaner cover clips, remove the air cleaner cover, and
remove the foam filter element (see page 10).
2. Remove the four 5 mm flange bolts, one 6 mm flange bolt, and air
cleaner case.
Remove the two 6 mm flange nuts and pull out the breather tube,
then remove the air cleaner base.
LOW PROFILE TYPES
BREATHER TUBE
6 mm FLANGE NUTS
5 mm FLANGE BOLTS
3. Move the fuel valve lever to the OFF position.
4. Remove the sediment cup, O-ring and filter.
5. Wash the sediment cup and filter in non-flammable solvent, and dry
it thoroughly.
AIR CLEANER BASE
AIR CLEANER CASE
5 mm FLANGE
BOLTS
6 mm FLANGE BOLT
6. Reinstall the filter, new O-ring, and sediment cup as shown. Tighten
the sediment cup securely.
(LOW PROFILE TYPES)
7. Install the air cleaner base, breather tube, air cleaner case, foam filter
element, and air cleaner cover in the reverse order of removal.
ENGLISH
FUEL VALVE LEVER
OFF
FILTER
O-RING (Replace)
SEDIMENT CUP
11