Specifications; Stihl Rle 240.0 Lawn Scarifier; Rollers; Extension Cords - Stihl RLE 240 Notice D'emploi

Masquer les pouces Voir aussi pour RLE 240:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
English

19 Specifications

19.1 STIHL RLE 240.0 Lawn Scarifier

– Power supply: See rating plate
– Frequency: See rating plate
– Power input: 1500 W
– Weight: 16 kg
– Maximum grass catcher box capacity: 50 l
– Working width: 34 cm
– Speed: 4100 rpm
– Working depth: Infinitely variable, adjustment range
15 mm
– Electrical protection class: II
– Electrical type of protection: IPX4 (protection against high
levels of dust but not dust proof; splash proof from all
angles)

19.2 Rollers

1
2
Scarifying roller
– 20 fixed blades
Combing roller
– 11x2 moving spring-tines
48

19.3 Extension Cords

If an extension cord is used, it must have a ground wire and
the wire gage of its conductors must meet the following
minimum requirements – depending on the line voltage and
length of the extension cord:
If rated voltage on the rating label is 220V to 240V:
– Cord length up to 20 m: AWG 15 / 1.5 mm²
– Cord length 20 m up to 50 m: AWG 13 / 2.5 mm²
If rated voltage on the rating label is 100 V to 127 V:
– Cord length up to 10 m: AWG 14 / 2.0 mm²
– Cord length 10 m up to 30 m: AWG 12 / 3.5 mm²

19.4 Sound Values and Vibration Values

The K value for the sound pressure level is 3 dB(A). The K
value for the sound power level is 4.7 dB(A). The K value for
the vibration values is 2.08 m/s².
– Sound pressure level L
pA
EN 50636-2-92: 79 dB(A)
– Sound power level L
wAd
2000/14/EC: 95 dB(A)
– Vibration value a
measured in accordance with EN
hw
20643, EN 50636-2-92, handlebar: 5.2 m/s²
The indicated vibration values have been measured in
accordance with a standardised test method and can be
used for the purpose of comparing electrical appliances. The
actual vibration values that occur may deviate from the
indicated values, depending on the type of application. The
indicated vibration values can be used for an initial
assessment of the vibration load. The actual vibration load
must be assessed. Times during which the electrical
appliance is switched off, along with times in which it is
switched on but running without load, can also be taken into
consideration.
For information on compliance with Employers' Vibration
Directive 2002/44/EC see www.stihl.com/vib.
19 Specifications
measured in accordance with
measured in accordance with
0478-670-9910-A

Publicité

Table des Matières
loading

Table des Matières