Erreka ARC Manuel De L'installateur page 24

INSTALLATION
Mount the bracket (1) and the actuator (2)

The screws (3) and plugs (4) are not
supplied. Use screws and plugs which are
suitable for the place of attachment and the
effort and weight of the actuator.
Position the arm (5) on the shaft (6)

Secure the arm using the screw and the
washer (7) to ensure it will not come loose.
20
Installation Manual
1 1
Mount the arm (8) and its bracket (9)

The screws (10) are not supplied. Use screws
which are suitable for the place of
attachment and the effort of the actuator.
450 mm arm: L=740 mm max.
650 mm arm: L=1100 mm max.
Adjust the ends of travel

Unlock the actuator and move the gate to the
ends of travel, in order to then adjust the
camshafts (11) and (12).
1 1