Actuator Characteristics; Declaration Of Conformity - Erreka ARC Manuel De L'installateur

DESCRIPTION OF THE PRODUCT
2

ACTUATOR CHARACTERISTICS

This actuator, along with its corresponding Erreka control panel, allow the implementation of a gentle halt system,
with the speed slowing down at the end of the closing and opening operations.
Model
Power supply (Vdc)
Max intensity (A)
Power consumed (W)
Capacitor (μF)
Protection grade (IP)
Available torque (Nm)
Output speed (rpm)
Opening time 90º (s)
Locking
Service temperature (ºC)
Duty cycle (%)
Size and weight of the gate
Limits on use

We recommend using an electrolock for leaf lengths of over 1.8m.

Values for orientation purposes. The form of the leaf and the presence of strong wind may
bring notable differences in the values of the chart.
3

DECLARATION OF CONFORMITY

E r r e k a A u t o m a t i s m o s d e c l a r e s t h a t t h e A R C
electromechanical actuator has been designed for use
in a machine or for assembly along with other elements
in order to form a machine in line with Directive 2006/
42/EC.
The ARC electromechanical actuator allows for
installations in line with Standards EN13241-1 and
EN12453, provided any necessary additional safety
devices are installed in accordance with the specific
installation (type of use, user qualification, location,
16
Installation Manual
AR24C
-25/+60
AR24C
AR220C
24
5,3
70
no
44
260
2
8
Yes
-25/+60
80
See "Limits on use"
etc). It is the installer's responsibility to choose the
necessary devices (photocells, safety strips, etc).
The ARC electromechanical actuator complies with
safety legislation in line with the following directives
and standards:
• 2006/95/EC (low voltage materials)
• 2004/108/EC (electromagnetic compatibility)
• UNE-EN 60335-1
230
1,1
320
8
44
320
2
8
Yes
15
AR220C