The order in which the sequences follow each other is indi-
cated to the side.
To activate the desired colour sequence, press the "on/off"
key: the corresponding symbol will appear on a white back-
ground, as shown in the example.
DREAM
ENERGY
Each colour sequence lasts about 12 minutes: when this time
has passed (or if the "on/off" key is pressed) the fixed colour that
was active before selecting the sequence itself will be displayed.
The function lasts one hour, but can be interrupted (or reac-
tivated) at any moment by pressing the "Cromodream" key.
Notes
- If the "Cromodream" key is pressed also when another electronic
function is active, the colour or colour sequence active at that mo-
ment will be temporarily displayed.
To return to the display of the main electronic function, wait a few
seconds without pressing any key or press the key related to the
function.
Audio system (TOP model)
FILE MANAGEMENT
Connecting a USB memory device (key)
Make sure that the control panel is in "stand-by" mode (only
the "on/off" key is illuminated; refer also to the "Activating the
electronic functions " chapter).
Lift the rubber cover on the USB port on the shower unit and
insert the key; the display will show the following configuration
(USB is already selected).
The key can also be inserted when a function is active or be-
fore switching on the shower unit; in these cases, once the function
has ended or upon completion of the initial checks that are acti-
vated when the unit is switched on, the control panel will automati-
cally display the USB/MEMORY screen.
Navigating a file list
Make sure that the USB symbol has been selected and press
the "on/off" key: a list of files and/or folders will appear, similar to
the one shown.
MEMORY
USB
10%
65
E ORY
USB
10%
USB
> 01 abcd.mp3
02 abd.mp3
03 cd.mp3
04 ad.mp3
ROCK