Product Description; Installation Instructions - Frigelux TOPCV135NXA++ Manuel D'instructions

PRODUCT DESCRIPTION

2.

INSTALLATION INSTRUCTIONS

3.
Location
When selecting a location for your appliance you should make sure the floor is flat and firm,
and the room is well ventilated with an average room temperature between 16 ℃ and 38 ℃.
Avoid location near a heat source, eg, cooker, boiler or radiator. Also, avoid direct sunlight
in out-buildings or terraces/outside seating areas. If you are placing your appliance in an
out-building such as a garage or annex ensure that it is placed above the damp course,
otherwise condensation will occur on the cabinet. Never place the appliance in a wall
recessed or into fitted cabinets or furniture when it is working, the metal grid at the back
may become hot and the sides warm.
Leveling the appliance
If your appliance is not leveled, the door and magnetic seal alignment
will be affected and may cause a malfunction. Once the appliance is
placed in its final location, adjust the leveling feet at the front by turning
them.
Cleaning before use
Wipe the inside of the appliance with a weak solution of bicarbonate of soda. Then rinse
with warm water using a damp sponge or cloth. Wash the baskets and shelves in warm
soapy water and dry completely before replacing them.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the appliance.
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE APPLIANCE.
1. Thermostat
2. Flap
3. Drawers
4. Adjustable feet and rollers
22