Frigelux TOPCV135NXA++ Manuel D'instructions page 19

Daily utilisation
▪ Do not store inflammable substances or fluids inside the appliance. This would create a
risk of explosion.
▪ Do not operate other electrical equipment inside the appliance (mixers, whirling rotor for
ice cream, etc.).
▪ When disconnecting the appliance, grip the plug firmly and do not pull on the cable.
▪ This appliance is designed for food and beverage storage.
▪ Do not expose the appliance to direct sunlight.
▪ Keep the appliance away from candles, luminaires and open flames, in order to avoid fire
risk.
▪ The appliance is heavy. Be careful when moving it.
▪ If your appliance is equipped with castors, remember that these are only designed to
facilitate minor movements. Do not move the appliance over long distances.
▪ Do not lean or climb on the appliance or its elements.
▪ In order to avoid falling objects and to prevent damage to the appliance, do not overload
the compartments of the appliance.
To avoid contamination of food, please respect the following instructions:
▪ clean regularly surfaces that come in contact with food and accessible drainage
systems.
▪ store raw meat and fish in suitable containers so that it is not in contact with or drip
onto other food. Caution! Cleaning and servicing
▪ Before carrying out servicing, switch off the power supply and disconnect the appliance.
▪ When cleaning the appliance, do not use metal objects, steam systems, volatile fluids,
organic solvents or abrasive substances.
▪ Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
▪ To ensure proper electrical connection, follow the recommendations given in the present
manual.
▪ Unpack the appliance and visually check that it is not damaged. Do not connect a
damaged appliance. Inform your retailer or point of sale of any damage. In such a case,
keep the packaging.
▪ It is recommended that the appliance be allowed to settle for at least 4 hours before
connecting the electrical power supply, so that the compressor fluid feed is correct.
▪ Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation,
observe the installation recommendations provided.
▪ In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact
with walls or with any hot element (compressor, condenser). Observe the installation
recommendations.
▪ The appliance should not be placed close to radiators or cooking hot plates or gas
▪ Check that electrical sockets remain accessible when the appliance is installed
19
rings.