Connecting The Power Source - Sony Glasstron PLM-A55 Mode D'emploi

Notes
• Even if you use the supplied audio/video
cable, the audio and video signals may not be
carried to the Glasstron depending on the
video source. In this case, contact your Sony
dealer or local authorized Sony service
facility.

Connecting the power source

Connect the AC power adapter AC-PLM2 (supplied) to a wall outlet. Do not connect the power
source until all other connections are complete.
to wall outlet
AC power adapter
AC-PLM2 (supplied)
* You can connect an optional headphone
set. When using an optional headphone
set, the sound from the Glasstron
earphones is muted.
• When you connect the Glasstron to the audio
output jacks (phono jacks) of your video
equipment, connect the Glasstron to both the
right and left audio output jacks. If you
connect the Glasstron to just one audio output
jack, you will hear sound from only one of the
stereo earphones.
AC power cord
(supplied)
Audio out 2 jack
(stereo minijack)*
DC IN 9V
to DC IN connector
Display unit
Power supply box
15
-US