Commissioning Of The Device; How To Install The Batteries - STEAMAX MAJESTY Manuel D'utilisation

STEAMAX MAJESTY – COMMISSIONING OF THE DEVICE
Operating instructions
Fully charge the two necessary and replaceable 18650 batteries before first use. Please take note of the positive
and negative poles in the battery compartment. Ensure that there is no visible damage to the surface of the
battery cells. The device has a 510-pin connection with a spring-loaded connector, making it suitable for a variety
of sub-ohm-capable clearomizers.
Note: If the display does not light up after switching the device on, make sure that you have inserted the batteries correctly
and that they have sufficient power. If the device still cannot be switched on despite fulfilling all the aforementioned
prerequisites, please contact our customer service department

How to install the batteries

Open the battery compartment by lightly pulling up the cover.
Then place the two charged 18650 batteries in the device accor-
ding to the poles indicated. Close the battery compartment.
www.steamax.com
51