Commissioning Of The Device; How To Install The Batteries - STEAMAX CB-80 Manuel D'utilisation

STEAMAX CB - 80 – COMMISSIONING OF THE DEVICE
Operating Instructions
Fully charge the necessary and replaceable 18650 battery before first use. Please take note of the
positive and negative poles in the battery compartment. Ensure that there is no visible damage to
the surface of the battery cells. The device has a 510-pin connection with a spring-loaded connector,
making it suitable for a variety of sub-ohm-capable clearomizers.

How to install the Batteries

Open the battery compartment by lightly pulling up the cover. Then place the charged 18650
battery in the device according to the poles indicated. Close the battery compartment.
Note: If the display does not light up after switching
the device on, make sure that you have inserted the
batteries correctly and that they have sufficient power. If
the device still cannot be switched on despite fulfilling
all the aforementioned prerequisites, please contact our
customer service department.
62
www.steamax.com