COMPULSARY INSPECTIONS AND CHECKS
Maintenance inspections and operations must be performed by qualified and entitled persons.
ƒ
Check on startup (or starting back up): in compliance with the national regulations.
ƒ
Compulsory periodical check in compliance with the national regulations. Recommended at
least every 12 months by TRACTEL SOLUTIONS SAS.
ƒ
A thorough examination paying particular attention to any alteration of parts due to an impact,
corrosion, cracking or deformation must be conducted a minimum of twice a year, every month
in the case of heavy-duty use in an aggressive atmosphere.
ƒ
TRACTEL SOLUTIONS is at your disposal in order to conduct any regulatory check.
Maintenance inspections and operations must be performed by qualified and entitled persons.
Regularly check the equipment is in perfect working order (before every use), in particular the
ƒ
semi-automatic system and the pivoting pads.
ƒ
Perform visual inspection before every use.
ƒ
Any part with a defect must be replaced by a TRACTEL SOLUTIONS part.
ƒ
The grab has to be stored in an safe place, at ambient temperature
ƒ
During the storage, the grab has to be in a stable position without risks of tipping over. On
request, Tractel Solutions supplies appropriate storage supports
Any deformed equipment must be immediately withdrawn from use.
ƒ
M 6112 M
rev 4 – 12/2017
STORAGE AND MAINTENANCE
GB
p. 12 / 28