6.4 Network
Information
MAC address:
Obtain IP address automatically:
Use the following IP address:
IP address:
Subnet mask:
Standard router (gateway):
Use the following DNS server address:
Primary DNS server:
Secondary DNS server:
HTTP port number:
The hardware address of the camera is shown here.
The IP address, subnet mask, and address for the default gateway
are obtained automatically from a DHCP server. An activated DHCP
server must be present in the network in this case.
Manual setting of the IP address, subnet mask, and standard router
(gateway)
Manual setting of the IP address for the IP camera
Manual setting of the subnet address for the IP camera
Manual setting of the standard router for the IP camera
If the DNS server address is not automatically assigned by
a DHCP server, it can be manually assigned here.
First server address with which the camera attempts to
convert DNS names into IP addresses.
Alternative server address with which the camera attempts
to convert DNS names into IP addresses.
The standard port for HTTP transmission is 80. As an alternative,
this port can be assigned a value in the range of 1024–65535. If
several IP cameras are located in the same subnetwork, then each
camera should have its own unique HTTP port.
94