Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Beam angle:
DMX control channels:
DMX512 connection:
Sound-control:
Flash-rate:
Number of colors:
Number of gobos:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Accessory:
OMNILUX OBA250/2SE D 90V/250W GY9.5 8500K
OMNILUX OSD 90V/250W GY-9.5 2000h 6700K
OSRAM HSD 250/60 4ArXS GY-9.5 2000h
PHILIPS MSD250 90V/250W GY-9.5 2000h
GE CSD250/2 95V/250W GY-9.5 2000h 8500K
OMNILUX OSD 250/2 94V/250W 2000h 8000K
PHILIPS MSD250/2 90V/250W GY-9.5 2000h
SYLVANIA BA250/2SE D 90V/250W GY9.5 8500K
EUROLITE DMX operator 192 channels
Wizard-512 USB DMX software + interface
Wizard-1024 USB DMX software + interface
DMX terminator DES-3 DMX 3-pin
Safety bond AG-15 4x1000mm up to 15kg
Please note: Every information is subject to change without prior notice. 23.02.2010 ©
230 V AC, 50 Hz ~
575 W
approx. 14°
3
3-pin XLR
via built-in microphone
1-7 Hz
14 dichroic + white
10 gobos, 5 beam-shapers
315 x 270 x 285 mm
7 kg
:
45° C
a
(steady state):
65° C
B
0.5 m
0.5 m
F 3.15 A, 250 V
No. 89106108
No. 89106005
No. 89106010
No. 89106015
No. 89106100
No. 89106105
No. 89106115
No. 89106120
No. 70064520
No. 51860102
No. 51860110
No. 51834001
No. 58010364
28/54
00026486.DOC, Version 1.5